Categories

Fire Up! How to Build a Fire Pit in Your Yard

Fire Up! How to Build a Fire Pit in Your Yard

This might have been the first time you are trying to get a fire pit in your yard. Catching up with the landscape and architecture designer is the first solution for the same. Building a fire pit on your own will take time and utmost dedication. Moreover, you need to research well to check out all the variations before the final call.

If you think the task is not your cup of tea, calling the experts will be your best help. They have been associated with this field for a long time and can guide you to the best and most rewarding solution of all time. In case you are trying to build a fire pit in your yard arena, there are certain things you need to consider now.

The basic steps to venture in:

Even before you start the fire pit, you have to check on the recreational fire codes for the area to ensure that the pit is allowed. If you aren’t sure, you can call the local fire department to get the task done. It is mandatory to create the pit at least around 10 feet from any building structure, fence, trees, or other obstructions.

  • Make sure that you don’t have anything hanging right above the fire pit. So, even if the tree’s base is around 10 feet away, you don’t want the branches to hang directly around the fire pit. 
  • If you want, you can get the landscaping stones from larger hardware stores. But make sure that you check the smaller local hardware stores for checking out the available stones to consider.
  • At the local store, you will get a larger range of colors to choose from. You can either opt for two or three stone layers with or without a metal ring or can opt for the options within your pre-set budget plans.

Get started with the fire pit outline:

It is always mandatory for you to outline the fire pit as your first step. For that, you have to lay out the bottom ring of stones in the grass, where you want the fire pit to be settled in.

  • In case you are using a metal ring, then you can use that same for building a few stones around just to find the circle.
  • Now, it is time to remove a few stones so that you can have proper space in between them. 
  • On the other hand, you can use the power of spray paint for marking where the outside of the stones will hit.
  • Make sure to remove those remaining stones just to complete the painted circle you have created.

It is time to dig the fire pit:

You can always take the help of landscape architecture experts to dig up the fire pit. Or else, you get to use a mattock, shovel, and other digging tools that you need for digging out the circle around 6 inches deep. Based on where you live now, it will be an easier or a difficult task.

Some of the grasses will have strong roots and have lots of giant rocks that you need to focus on. So, that will be a hardcore working routine for you to follow right now.

Time to fill out the fire:

Once you have 6 inches of hole dig, you just need to pour the gravel right into the hole until the gravel is level up with the ground. The gravel will provide your fire pit with an important drainage area when it might rain.

Now time to build the fire pit:

It is now time to start crafting the fire pit, and you can get help from a landscape architecture designer for some advice. For that, you need to place the first ring of stones around the edge of the gravel circle and then use a rubber mallet for tamping the stones flat and even with one another.

In case you are using a metal ring, you can always keep that in the middle, just to ensure that you fit stones right up against the ring.

Simple steps to follow:

These are the simple steps to follow when it comes to designing a fire pit in your yard. If you need some help, the Masara team is there to rescue you.