Categories

How To Select The Right Hydraulic Cylinders

Milwaukee cylinders

While you are selecting Milwaukee cylinders, you must be well-versed in their specifications to get the best one. Hydraulic cylinders are specifically designed to create a pushing or pulling force in a straight line.


Mainly, these cylinders consist of a piston and a rod within a cylindrical bore. You can use a hydraulic cylinder for any application requiring a strong push or pull force. 


Hydraulic cylinders are indeed a great innovation in the industrial sector. But the proper selection of a hydraulic cylinder needs the consideration of various factors. 


What You Should Consider To Choose Milwaukee Cylinders

As mentioned above, you need to consider several factors to choose the right Milwaukee cylinders. Such factors are;


Type of the Cylinder

While choosing a hydraulic cylinder, you can choose anything from a single acting hydraulic cylinder, double acting hydraulic cylinder, jack cylinders, and telescopic cylinders. You can choose any of these four as per your requirements.


Single acting cylinders are suitable for works that require push and pull force. On the other hand, a double acting hydraulic cylinder forces the piston rod into the advance and retract directions.


Jack cylinders are mobile cylinders that usually come in variable sizes. These cylinders can be used on the floor. In contrast, telescopic cylinders are used in tipping trucks. You need to choose the cylinder as per your work requirements.


Bore Size

The next considerable factor is the bore size when selecting Milwaukee cylinders. While buying a hydraulic cylinder, you need to calculate the bore size. 


The force the cylinder produces is a product of the system pressure. You have to multiply the pressure amount by the area of the internal piston surface. You can use this formula to calculate the bore size. 


Rod Size

Once you calculate the rod size, next, you have to consider the rod size. Usually, hydraulic cylinders come with one or two rod options. To select the proper rod size, you must consider the stroke length, which affects the rod’s buckling strength.


Mass

While choosing Milwaukee cylinders, you need to consider the mass of the cylinder. Once you know the mass, you have to consider that the mass will have on the force.


For example, a 1-ton cylinder requires enough force to overcome friction and acceleration. Therefore, the force of the hydraulic cylinder should be high enough to allow for a margin of error.


Geometry

Last but not least, you have to consider the geometry involved in the operation of a hydraulic cylinder. When the centre of the load gets moved, the required force by the cylinder changes as well.


For example, if you have a crane, the cylinder pushes very far from the load. However, in most cases, the load distance can be up to ten times the lift force. 


Conclusion

You need to consider these essential factors while picking up Milwaukee cylinders. Thus, you can avail of the best service from a hydraulic cylinder.


Still, if you don’t know how to take the measurements mentioned above, you can consult a professional. Otherwise, take an idea from a hydraulic engineering team to get the best advice.